3DFPod Ch. 7 – Intro to 3D Food Printing for Makers! | 3DCxPinshape

Continuing on our podcasting journey in 3D Food Printing we have a special chapter: Intro to 3DFP for MAKERS! This is a special chapter because it correspondes with our latest collab: 3DIGITALCOOKS x Pinshape. Big shoutout to Lauren Watkins and the whole Pinshape community for welcoming us with open arms and allowing us to help explain how to get into 3D Food Printing for Makers.

A couple of the great things about getting started with 3D food printing as a Maker is that there is already a skill set and more importantly a frame of mind that allows the Maker to move quickly in 3DFP.

Preview of Ch. 7: Intro to 3D Food Printing for Makers podcast

  • How to start with 3D Food Printing as a Maker
  • Recipe suggestions
  • Extruders for 3DFP
  • 3D printers that will you will want to look at for 3DFP
  • 3D food printing design tools makers can use

Here is the SoundCloud embed:

Subscribe and download the 3DFPod by following the links below

If you came here from Pinshape, Welcome and thank you for your support of us and Pinshape! If you didn’t, head over to Pinshape now to check out the article here: https://pinshape.com/blog/5-step-beginners-guide-to-3d-printing-food/

Thank you again for supporting these 3D food printing podcasts!  It really means a lot to us!

Luis + Jason

P.S. There are still some spots available for our next 3D food printing workshop.. Go here to register now: http://www.fabcon-germany.com/en/visitors/special-event-food-printing.html

One thought on “3DFPod Ch. 7 – Intro to 3D Food Printing for Makers! | 3DCxPinshape

Leave a Reply

Join the 3DIGITALCOOKS community
We've got some big announcements coming in the near future. Add your name and email below so you can be the first to know!
Your Information will never be shared with any third party.
Skip to toolbar